Tablet stand 10-11 inch
Tablets are heavier than they look, so this one keeps the full wedge and a deep base, then opens it into triangular windows between ribs that fan out from the top corner. It will not walk across the desk when you tap the screen, and it takes far less plastic than a solid block.
2D preview
⬇ Download STL + 3MF (zip)
Customize (configurator with these values)
Files are generated on request from the live generator; free, no account.
Specifications
| Device | up to 14 mm thick with the case |
|---|---|
| Cradle | 120 mm wide, 90 mm of back support |
| Shape | Frame: the wedge opened into triangular windows |
| Angle | 60 degrees |
| on its side, no supports |
Printing
- Prints lying on its side exactly as exported: no supports; patterns lean 45 degrees at most.
- Ribbon and arch: print the band solid or with 4+ walls. Frame and solid: 3 walls, 15% infill.
- Steep angles are for watching; about 50 degrees is the typing sweet spot.
More phone & tablet stands
- Phone charging stand for an 11 mm case
- Phone with a case stand, 50 degrees (typing)
- Phone with a case stand, 62 degrees (desk)
- Phone with a case stand, 72 degrees (video)
- Phone without a case stand, 50 degrees (typing)
- Phone without a case stand, 62 degrees (desk)
- Phone without a case stand, 72 degrees (video)
- Phone without a case charging stand, 62 degrees
- All phone & tablet stands · set your own dimensions in the Phone & Tablet Stand Generator