Phone charging stand for an 11 mm case
The stand most phone owners actually need: it is built around the case you already have, not around a bare phone, and it charges. The phone rests in a cradle raised above the base, so the plug hangs in the air through a slot open to the front: slide the cable in, plug in, set the phone down. It prints on its side, so there is nothing to support and nothing to clean up.
2D preview
⬇ Download STL + 3MF (zip)
Customize (configurator with these values)
Files are generated on request from the live generator; free, no account.
Specifications
| Device | up to 11 mm thick with the case on |
|---|---|
| Angle | 62 degrees, comfortable for watching |
| Shape | Ribbon, raised: the cradle 40 mm above the desk |
| Charging | 14 mm slot through the cradle floor and lip, open to the front |
| on its side, no supports |
Printing
- Prints lying on its side exactly as exported: no supports; patterns lean 45 degrees at most.
- Ribbon and arch: print the band solid or with 4+ walls. Frame and solid: 3 walls, 15% infill.
- Steep angles are for watching; about 50 degrees is the typing sweet spot.
More phone & tablet stands
- Tablet stand 10-11 inch
- Phone with a case stand, 50 degrees (typing)
- Phone with a case stand, 62 degrees (desk)
- Phone with a case stand, 72 degrees (video)
- Phone without a case stand, 50 degrees (typing)
- Phone without a case stand, 62 degrees (desk)
- Phone without a case stand, 72 degrees (video)
- Phone without a case charging stand, 62 degrees
- All phone & tablet stands · set your own dimensions in the Phone & Tablet Stand Generator