Measure your phone WITH the case, pick an angle and a shape: a light folded ribbon, a curled arch, a truss frame or the classic block, smooth or rippled, and raise any of them for charging. Prints on its side with no support.
Free and without an account: type the numbers, watch the live preview, download STL and 3MF files that Bambu Studio, OrcaSlicer and PrusaSlicer open directly. Looking for a ready-made size? The model library has 651 of them, each with its dimensions already filled in.
Yes, if you measure it with the case on and type that thickness; the cradle is built from your numbers, not from a phone model.
Ribbon and arch are a single band 4 to 6 mm thick, about a third of the plastic of the classic block. Frame keeps the wedge but opens it into truss windows; solid is the full block. Raising any of them for charging adds a base under it and the drop down to it.
No. Waves, zigzag, ridges and facets shift each slice along the depth by at most 45 degrees, so the stand still prints on its side with no support, and the cradle opening grows by the pattern depth so the device never jams.
Steep angles are for watching video; about 50 degrees is the sweet spot for typing on a tablet.
Tick Raised (charging) under the pattern, with any shape: the cradle sits on a base with air under it, and a slot open to the front lets the charging plug hang down into that air. Without it the device stands on the floor of the cradle, so there is no room for a plug.
Your exact configuration is attached automatically, so the bug can be reproduced one-to-one. No account needed.
The machine that generates the models seems to be down or restarting. Your settings are safe in this tab: nothing is lost. Wait a moment and try again.