Spool stand with 608 bearings
Two skateboard bearings turn a sticky spool into a flywheel. The cone hubs slide on from the axle's plain end, wedge into the bore from both sides, and a press-on cap closes the assembly.
2D preview
⬇ Download STL + 3MF (zip)
Customize (configurator with these values)
Files are generated on request from the live generator; free, no account.
Specifications
| Spool | 1 kg class (200 x 70, bore 55) |
|---|---|
| Bearings | 2 x 608 pressed into the hubs |
| Parts | 2 stands + axle + 2 hubs + end cap |
Printing
- Stands and hubs print flat; the axle prints standing, use a brim.
- 3 walls, 15% infill carries a 1 kg spool.
- Assembly: slide hub, spool, hub onto the axle, press the cap on, drop into the cradles.
More spool holders
- Cardboard spool stand (33 mm bore)
- Spool stand for 200 mm spools (1 kg)
- Spool stand for 200 mm spools with 608 bearings
- Spool stand for 250 mm spools (3 kg)
- Spool stand for 160 mm spools (500 g)
- Spool stand for 200 mm spools with a 70 mm bore
- Spool stand for cardboard spools, 35 mm bore
- All spool holders · set your own dimensions in the Spool Holder Generator