Spool stand for 200 mm spools with 608 bearings
A six-part desktop stand for a 1 kg spool spinning on skateboard bearings. The cone hubs wedge into the bore from both sides so the spool runs centered, and a 608 bearing in each hub makes it spin with a fingertip. 3 walls and 15% infill carry the spool.
2D preview
Customize (configurator with these values)
Files are generated on request from the live generator; free, no account.
Specifications
| Spool | 200 mm diameter, up to 70 mm wide, 55 mm bore |
|---|---|
| Hubs | cone hubs, self-centering, with 608 bearing pockets |
| Parts | 2 stands, axle, end cap, 2 hubs |
| stands and hubs flat, axle standing with a brim |
Printing
- Stands and hubs print flat; the axle prints standing, use a brim.
- 3 walls, 15% infill carries a 1 kg spool.
- Assembly: slide hub, spool, hub onto the axle, press the cap on, drop into the cradles.
More spool holders
- Spool stand with 608 bearings
- Cardboard spool stand (33 mm bore)
- Spool stand for 200 mm spools (1 kg)
- Spool stand for 250 mm spools (3 kg)
- Spool stand for 160 mm spools (500 g)
- Spool stand for 200 mm spools with a 70 mm bore
- Spool stand for cardboard spools, 35 mm bore
- All spool holders · set your own dimensions in the Spool Holder Generator