50 mm 45 degree hose elbow
An adapter for a 45 degree bend in a 50 mm hose run. Both ends have a slight jam-fit taper and friction ribs, so it seats snug on vacuum hoses, sander ports and extractor fittings without tape. Elbows over 30 degrees need tree supports touching the outside only, or stand it on the bend. If your port measures differently, the diameters are editable to a tenth of a millimetre.
2D preview
Customize (configurator with these values)
Files are generated on request from the live generator; free, no account.
Specifications
| End A | 50 mm, slides over the port |
|---|---|
| End B | 50 mm, slides into the port |
| Elbow | 45 degrees |
| Grip | jam-fit taper + 3 friction ribs per end |
| Wall | 2.4 mm |
Printing
- Prints standing on the wider end: no supports for straight adapters.
- 3+ perimeters, no infill needed; PETG grips hoses better than PLA.
- The tapered ends jam tight; the ribs hold the hose without tape.