57 mm to 32 mm hose adapter
A dust-extraction adapter from ⌀57 mm to ⌀32 mm. Both ends carry a slight jam-fit taper and friction ribs, so it seats snug on vacuum hoses, sander ports and extractor fittings without tape. Adjust either diameter by a fraction of a millimeter in the configurator if your port measures differently.
2D preview
⬇ Download STL + 3MF (zip)
Customize (configurator with these values)
Files are generated on request from the live generator; free, no account.
Specifications
| End A | ⌀57 mm (slides into the port (⌀ is the bore) |
|---|---|
| End B | ⌀32 mm) slides into the port (⌀ is the bore) |
| Elbow | straight |
| Grip | jam-fit taper + 3 friction ribs per end |
| Wall | 2.4 mm |
Printing
- Prints standing on the wider end: no supports for straight adapters.
- 3+ perimeters, no infill needed; PETG grips hoses better than PLA.
- The tapered ends jam tight; the ribs hold the hose without tape.