Herb planter 200 mm, no tray
A trough for a trough that sits in its own saucer: 200 mm long, 90 mm wide and 90 mm tall, holding about 1.1 litres of soil. No tray: stand it in a saucer or a sink. Vertical flutes catch the light; PETG resists wet soil for years, PLA lasts a season or two.
2D preview
Customize (configurator with these values)
Files are generated on request from the live generator; free, no account.
Specifications
| Trough | 200 x 90 x 90 mm, walls lean out 6 mm at the rim |
|---|---|
| Walls | fluted, 2.8 mm |
| Soil | about 1.1 L with 2 cm headroom |
| Drainage | holes in the floor |
| Tray | none |
Printing
- Both parts print upright without supports: the taper leans only a few mm over the wall height.
- 3 walls, any infill; PETG resists wet soil, PLA lasts a season or two.
- Cover the drainage holes with a shard or mesh so soil stays in.
More windowsill planters
- Fluted herb trough 200 mm
- Big windowsill trough 250 mm
- Mini windowsill planter 120 mm
- Succulent bar 160 mm
- Windowsill planter 180 mm, fluted
- Windowsill planter 200 mm, plain
- Windowsill planter 220 mm, fluted
- Deep windowsill planter 250 mm
- All windowsill planters · set your own dimensions in the Planter Generator