French cleat shelf 140 x 60 mm
A shelf for glue, oil and small cans. Its back cleat wedges over the rail, so you lift it off to move it; prints face down because the wedge only shrinks going up.
2D preview
Customize (configurator with these values)
Files are generated on request from the live generator; free, no account.
Specifications
| Type | shelf |
|---|---|
| Dimensions | shelf w 140 mm, shelf d 60 mm, lip h 8 mm |
| Cleat | 30 x 12 mm, 45 degrees |
| face down, no supports | |
| Material | PETG for the garage, PLA indoors |
Printing
- Holders print face down with no supports: the cleat wedge only shrinks going up.
- PETG for garage duty, PLA indoors; 3 walls, 20% infill for brackets.
- Screw the rail to studs with 4.5 mm countersunk screws.
More french cleat holders
- French cleat wall rail 200 mm
- French cleat tool cup
- French cleat rail, 300 mm
- French cleat rail, 150 mm
- French cleat cup 60 x 45 x 60 mm
- French cleat big cup 100 x 70 x 90 mm
- French cleat shelf 200 x 90 mm
- French cleat screwdriver rack
- All french cleat holders · set your own dimensions in the French Cleat Generator