French cleat rail, 300 mm
A rail segment, a rail segment for a 300 mm bed. Screw it to studs with 4.5 mm countersunk screws and print more segments with the bevels aligned.
2D preview
Customize (configurator with these values)
Files are generated on request from the live generator; free, no account.
Specifications
| Type | rail |
|---|---|
| Dimensions | rail len 300 mm |
| Cleat | 30 x 12 mm, 45 degrees |
| flat, bevel up | |
| Material | PETG for the garage, PLA indoors |
Printing
- Holders print face down with no supports: the cleat wedge only shrinks going up.
- PETG for garage duty, PLA indoors; 3 walls, 20% infill for brackets.
- Screw the rail to studs with 4.5 mm countersunk screws.
More french cleat holders
- French cleat wall rail 200 mm
- French cleat tool cup
- French cleat rail, 150 mm
- French cleat cup 60 x 45 x 60 mm
- French cleat big cup 100 x 70 x 90 mm
- French cleat shelf 140 x 60 mm
- French cleat shelf 200 x 90 mm
- French cleat screwdriver rack
- All french cleat holders · set your own dimensions in the French Cleat Generator