Coat hook with backplate (J), 45 mm reach
A J hook for a heavy winter coat on drywall anchors: it reaches 45 mm out from the wall on a 18 mm wide arm. The wide backplate spreads the load over two anchors, good for drywall. PLA is fine for light duty.
2D preview
Customize (configurator with these values)
Files are generated on request from the live generator; free, no account.
Specifications
| Shape | J hook |
|---|---|
| Reach | 45 mm from the wall |
| Arm | 18 mm wide, 10 mm thick, 16 mm upturn |
| Style | backplate 32 x 60 mm, prints back-flat |
| Screws | two 4 mm countersunk holes |
Printing
- Prints lying on its side: no supports, layers run along the arm.
- 4+ perimeters, 40% infill; PETG/ABS for heavy loads.
- Screw holes print sideways and bridge cleanly at this size.