Coat hook (J), 40 mm reach
A J hook for coats and bags by the door: it reaches 40 mm out from the wall on a 14 mm wide arm. It prints lying on its side, so the layers run along the arm, the strongest direction for a hook. PLA is fine for light duty.
2D preview
Customize (configurator with these values)
Files are generated on request from the live generator; free, no account.
Specifications
| Shape | J hook |
|---|---|
| Reach | 40 mm from the wall |
| Arm | 14 mm wide, 9 mm thick, 14 mm upturn |
| Style | flat profile, prints lying on its side |
| Screws | two 4 mm countersunk holes |
Printing
- Prints lying on its side: no supports, layers run along the arm.
- 4+ perimeters, 40% infill; PETG/ABS for heavy loads.
- Screw holes print sideways and bridge cleanly at this size.