Banana Pi M2 Zero case, screw lid
An enclosure for the Banana Pi M2 Zero, which shares the Pi Zero layout. The board sits on standoffs on its mounting holes, 65 x 30 mm, inside a 86.0 x 52.0 x 22.0 mm cavity with a screw-down lid on four M3 bosses for a case that gets opened often. Base prints open side up and the lid upside down; nothing needs supports.
2D preview
Customize (configurator with these values)
Files are generated on request from the live generator; free, no account.
Specifications
| Board | Banana Pi M2 Zero |
|---|---|
| Cavity | 86.0 x 52.0 x 22.0 mm inside |
| Lid | screw-down, four M3 bosses |
| Ports | 4 openings cut to the board's connectors |
| Vents | none |
| Wall | 2.4 mm |
| Feet | yes |
Printing
- Base prints open side up, lid prints upside down; no supports.
- Walls are 2.4 mm so a plug pushed into a port does not flex the case.
- Snap lid: 0.35 mm bead, pops on and off with a fingernail; screw lid takes M3 self-tappers.
More electronics enclosures
- Raspberry Pi 5 case, snap-on lid
- Raspberry Pi 5 case, vented, snap lid
- Raspberry Pi 5 case, screw lid
- Raspberry Pi 4B case, snap-on lid
- Raspberry Pi 4B case, vented, snap lid
- Raspberry Pi 4B case, screw lid
- Raspberry Pi 3B+ case, snap-on lid
- Raspberry Pi 3B+ case, vented, snap lid
- All electronics enclosures · set your own dimensions in the Electronics Enclosure Generator