Workshop funnel 100 to 25 mm
A funnel for solvents and coolant with a debris grate: a 100 mm bowl narrowing at 60 degrees into a 25 mm spout 40 mm long. The grate in the throat catches debris before it reaches the tank. It prints bowl-down without supports; use PETG for fuel, oil and solvents, PLA is fine in the kitchen.
2D preview
Customize (configurator with these values)
Files are generated on request from the live generator; free, no account.
Specifications
| Bowl | 100 mm opening, 60 degree cone |
|---|---|
| Spout | 25 mm bore, 40 mm long |
| Filter | printed grate in the throat |
| Hook | rim eyelet for a nail |
| Wall | 1.8 mm |
Printing
- Prints upside down as exported (bowl on the bed): the cone climbs without supports.
- Thin walls pour better: 2 perimeters, 0.2 mm layers.
- PETG for fuel and oil; PLA and gasoline do not mix.
More funnels
- Filtered fuel funnel 120 to 12 mm
- Wide-mouth jar funnel 90 to 30 mm
- Kitchen funnel 80 to 15 mm
- Kitchen funnel 100 to 18 mm
- Big kitchen funnel 120 to 20 mm
- Jar filling funnel 100 to 40 mm
- Wide-mouth jar funnel 120 to 40 mm
- Spice funnel 60 to 10 mm
- All funnels · set your own dimensions in the Funnel Generator