Socket set insert, 10 round pockets
A flat insert with pockets for ten 1/4 and 3/8 inch sockets standing up, each with a finger notch so nothing needs prying out. Pockets are cut exactly as listed (measure your own tools and edit the list in the configurator); the plate width is 220 mm and the depth packs itself. Print it in PETG for greasy tools and glue foam feet under it to stop rattling.
2D preview
Customize (configurator with these values)
Files are generated on request from the live generator; free, no account.
Specifications
| Plate width | 220 mm (depth packs itself from the pockets) |
|---|---|
| Pockets | 10: circle 20 x2 d24, circle 22 x2 d24, circle 24 x2 d24, circle 26 x2 d24 ... |
| Finger notch | 20 mm on every pocket |
| Floor | 3 mm under the deepest pocket |
| Spacing | 6 mm between pockets, 7 mm margin |
Printing
- Prints flat, no supports; 10% infill, 3 walls (the body is mostly infill).
- Pocket sizes are cut exactly as listed: measure the tool and add nothing.
- PETG for greasy tools, PLA otherwise; foam feet under the plate stop rattling.
More case inserts
- Wrench case insert, 5 slots
- Driver set insert with bit wells
- Wrench set insert, 8 slots
- Hex key set insert
- Screwdriver set insert, 6 slots
- Pliers set insert, 4 pockets
- EDC tray insert: knife, light, pen, multitool
- Measuring tools insert: calipers, tape, square
- All case inserts · set your own dimensions in the Case Insert Generator