38 mm bottle cap with hanging loop
A replacement cap for a wide-neck bottle on a hook. The thread matches the 38 mm standard, so it screws onto store bottles; the eyelet takes a carabiner or a nail. Print it in PETG so it flexes onto the neck instead of cracking, and add 0.1 mm of clearance if your brand runs tight.
2D preview
Customize (configurator with these values)
Files are generated on request from the live generator; free, no account.
Specifications
| Neck | 38 mm (37.2 mm, 3-start) |
|---|---|
| Style | cap with a hanging eyelet |
| Grip | knurled |
| Seal | none (dry seal on the neck lip) |
| Clearance | 0.5 mm, adjustable |
Printing
- Prints top-down as exported, threads up: no supports.
- PETG over PLA: it flexes onto the neck instead of cracking; 0.16 mm layers smooth the fine pitch.
- Too tight: regenerate with +0.1 mm clearance, necks vary by brand.
More pet bottle caps
- Spare PET bottle cap (PCO-1881)
- Two-bottle PET coupler (PCO-1881)
- Spare cap for PET bottles (PCO-1881)
- PET bottle cap with hanging loop (PCO-1881)
- PET bottle coupler (PCO-1881)
- Spare cap for older PET bottles (PCO-1810)
- PET bottle cap with loop (PCO-1810)
- 38 mm juice and milk bottle cap
- All pet bottle caps · set your own dimensions in the PET Cap Generator