Mini parts tray 100 x 100 mm, 4 cells
A sorting tray for a desk-corner catch-all: 2 by 2 cells in a 100 x 100 mm footprint, 20 mm tall. Each cell has a 6 mm scoop on its front edge so small parts roll into your fingers. Flat bottom, no stacking foot, so it is the lightest version.
2D preview
Customize (configurator with these values)
Files are generated on request from the live generator; free, no account.
Specifications
| Size | 100 x 100 x 20 mm |
|---|---|
| Cells | 2 x 2 = 4, each about 46 x 46 mm |
| Scoop | 6 mm cove on every cell front |
| Stacking | no |
| Walls | 3 mm outer, 1.6 mm dividers |
Printing
- Prints flat, no supports; the block under the floor is infill, not plastic.
- PETG slides parts nicely; PLA is stiffer.
- The stacking foot has a 45 degree flare that seats on the rim below and prints support-free.
More parts & sorting trays
- Screw sorter tray 4 x 3, stackable
- Bead tray 6 x 4, shallow
- Small parts tray 120 x 90 mm, 6 cells
- Screw sorter tray 160 x 120 mm, 12 cells, stackable
- Parts tray 200 x 150 mm, 20 cells, stackable
- Electronics parts tray 240 x 160 mm, 24 cells
- Bench tray 180 x 120 mm, 6 deep scooped cells
- Drill bit and driver tray 220 x 160 mm, 8 long slots
- All parts & sorting trays · set your own dimensions in the Parts Tray Generator