Large parts tray 300 x 200 mm, 24 cells
A sorting tray for the bulk fastener sorter: 6 by 4 cells in a 300 x 200 mm footprint, 35 mm tall. Each cell has a 8 mm scoop on its front edge so small parts roll into your fingers. The stacking foot drops into the rim of the tray below, so a stack stays put on a shelf.
2D preview
Customize (configurator with these values)
Files are generated on request from the live generator; free, no account.
Specifications
| Size | 300 x 200 x 35 mm |
|---|---|
| Cells | 6 x 4 = 24, each about 48 x 47 mm |
| Scoop | 8 mm cove on every cell front |
| Stacking | stepped foot seats in the rim below |
| Walls | 3 mm outer, 1.6 mm dividers |
Printing
- Prints flat, no supports; the block under the floor is infill, not plastic.
- PETG slides parts nicely; PLA is stiffer.
- The stacking foot has a 45 degree flare that seats on the rim below and prints support-free.
More parts & sorting trays
- Screw sorter tray 4 x 3, stackable
- Bead tray 6 x 4, shallow
- Small parts tray 120 x 90 mm, 6 cells
- Screw sorter tray 160 x 120 mm, 12 cells, stackable
- Parts tray 200 x 150 mm, 20 cells, stackable
- Electronics parts tray 240 x 160 mm, 24 cells
- Bench tray 180 x 120 mm, 6 deep scooped cells
- Drill bit and driver tray 220 x 160 mm, 8 long slots
- All parts & sorting trays · set your own dimensions in the Parts Tray Generator