92 mm fan grille, holes pattern
A finger guard and dust grille for a 92 mm case or radiator fan. The round holes leave most of the face open so the fan stays quiet, and the four countersunk holes land on the standard 82.5 mm pattern. Glue mesh to the back for a dust filter.
2D preview
Customize (configurator with these values)
Files are generated on request from the live generator; free, no account.
Specifications
| Fan | 92 mm (hole spacing 82.5 mm) |
|---|---|
| Pattern | perforated holes |
| Plate | 92 x 92 x 3 mm |
| Mount | 4 countersunk 4 mm screw holes |
| Open area | around 60-65% |
Printing
- Prints flat, face up, no supports; countersinks are 45 degree cones.
- 3 walls, any infill; PETG outdoors and in damp rooms.
- Glue fly screen to the flat back for bug-proofing.
More vent grilles
- 120 mm fan grille, honeycomb
- Wall vent cover 180 x 120 mm, slats
- 40 mm fan grille, hex pattern
- 60 mm fan grille, hex pattern
- 80 mm fan grille, hex pattern
- 80 mm fan grille, holes pattern
- 92 mm fan grille, hex pattern
- 120 mm fan grille, holes pattern
- All vent grilles · set your own dimensions in the Vent Grille Generator