Draft deck box, 40 cards
A deck box for a 40-card limited deck: the cavity is computed from the standard sleeves envelope and 40 cards, plus 3.5 mm of finger room, so the deck slides out without a fight and does not rattle. The slide lid runs in rails and prints flat, ridge up. Both parts print standing without supports.
2D preview
Customize (configurator with these values)
Files are generated on request from the live generator; free, no account.
Specifications
| Cards | 40 in standard sleeves |
|---|---|
| Lid | slide lid in side rails |
| Slack | 3.5 mm finger room |
| Wall | 2.6 mm |
Printing
- Both parts print standing, no supports; 3 walls, 10% infill.
- Slide lid prints flat, ridge up; candle wax if it runs stiff.
- Cap fit tuning: scale the cap 100.5% or 99.5% in the slicer.
More deck boxes
- Commander deck box, 100 double-sleeved
- 60-card deck box, sleeved
- MTG 60-card deck box, snap cap
- MTG 60-card deck box, slide lid
- 75-card deck box (main + sideboard)
- Commander deck box, 100 double-sleeved, magnet lid
- Commander deck box, 100 double-sleeved, snap cap
- Commander deck box, 100 single-sleeved, slide lid
- All deck boxes · set your own dimensions in the TCG Deck Box Generator