Commander deck box, 100 single-sleeved, magnet lid
A deck box for a single-sleeved Commander deck, magnets: the cavity is computed from the standard sleeves envelope and 100 cards, plus 3.5 mm of finger room, so the deck slides out without a fight and does not rattle. Four glued magnets hold the cap; check the polarity before the glue sets. Both parts print standing without supports.
2D preview
Customize (configurator with these values)
Files are generated on request from the live generator; free, no account.
Specifications
| Cards | 100 in standard sleeves |
|---|---|
| Lid | magnet cap, four 6 x 2 mm magnets |
| Slack | 3.5 mm finger room |
| Wall | 2.6 mm |
Printing
- Both parts print standing, no supports; 3 walls, 10% infill.
- Slide lid prints flat, ridge up; candle wax if it runs stiff.
- Cap fit tuning: scale the cap 100.5% or 99.5% in the slicer.
More deck boxes
- Commander deck box, 100 double-sleeved
- 60-card deck box, sleeved
- MTG 60-card deck box, snap cap
- MTG 60-card deck box, slide lid
- 75-card deck box (main + sideboard)
- Commander deck box, 100 double-sleeved, magnet lid
- Commander deck box, 100 double-sleeved, snap cap
- Commander deck box, 100 single-sleeved, slide lid
- All deck boxes · set your own dimensions in the TCG Deck Box Generator