Desktop spool stands in five parts: A-frames with drop-in cradles and cone hubs that self-center ANY bore you type in, with optional 608 bearing seats.
Free and without an account: type the numbers, watch the live preview, download STL and 3MF files that Bambu Studio, OrcaSlicer and PrusaSlicer open directly. Looking for a ready-made size? The model library has 651 of them, each with its dimensions already filled in.
Type the spool width and the bore, or leave the defaults for a standard 1 kg spool; the hubs adapt to the bore.
Plain hubs are fine on a desk; 608 bearings make the spool run free for a printer feeding straight from the stand.
Slide hub, spool, hub onto the axle, press the cap on and drop the axle into the cradles. The axle prints standing; use a brim.
Your exact configuration is attached automatically, so the bug can be reproduced one-to-one. No account needed.
The machine that generates the models seems to be down or restarting. Your settings are safe in this tab: nothing is lost. Wait a moment and try again.