CASE INSERT — print notes
====================================================

  Plate      250 mm wide × 18 mm thick (pockets 15 deep by default)

  PRINTING
    Flat, AS EXPORTED, no supports. 10% infill, 3 walls —
    the plate is mostly infill, so it's lighter and cheaper
    than foam that crumbles. PETG for greasy tools.

  Parts
    insert    250.0 ×  205.0 ×  18.0 mm   #455263

  Notes
    ! Pockets are cut to your numbers — measure the TOOL and add nothing; the print is the clearance. The uploaded outline gets +0.5 mm on its own.
    ! Prints flat, no supports; the body is infill, so a big insert is cheaper than it looks. 10% infill, 3 walls.
    ! PETG for greasy tools, PLA everywhere else. Foam feet under the plate stop it rattling in the case.
    ! Every pocket has a finger notch on its front edge — that's how the tool comes out again.

