KNOB — print notes
====================================================

  Style      wing · ⌀28 × 12 mm
  Hardware   M4 nut (hex 7, pocket 3.8 deep)

  PRINTING
    AS EXPORTED — top face on the bed, hex pocket up. No
    supports, no bridges. 3+ walls; 30% infill takes real
    clamping torque. PETG or PLA both work.

  Parts
    knob-wing     28.0 ×   14.7 ×  12.0 mm   #c2703e

  Notes
    ! Prints TOP DOWN as exported — the hex pocket faces up, no supports, no bridges. The bed face becomes the knob's top.
    ! Push the hex in cold; if it fights, a drop of CA glue beats reaming the pocket loose.

