PRINT-IN-PLACE HINGE BOX — print notes
====================================================

  Closed     90 × ~67 × 42 mm
  Hinge      pin
  Latch      snap

  PRINTING
    ONE part, flat and open, AS EXPORTED — no supports.
    0.2 mm layers, 3 walls. Fold it shut right off the bed;
    the first fold frees the hinge.

  Parts
    hinge-box    90.0 ×  132.0 ×  30.0 mm   #3f8fa8

  Notes
    ! ONE part, prints flat and open, no supports. Fold it shut hot off the bed — the first fold frees the hinge.
    ! 0.2 mm layers; 3 walls. Seam position matters more than usual — put it on the hinge side.
    ! The pin prints inside the knuckles with 0.5 mm of play. If the hinge is stiff, work it back and forth ten times — it wears in, not out.
    ! The snap tab clicks over the front ridge. It's designed to flex along the layers, so it won't delaminate.

