GRIDFINITY — print notes
====================================================

  Baseplate  4 × 4 sockets, 168 × 168 mm

  PRINTING
    Flat as exported, no supports — every chamfer is 45°.
    2 perimeters, 15% infill. Any material; PLA is fine indoors.

  THE STANDARD
    42 mm pitch, 7 mm height units, the 0.8/1.8/2.15 foot profile —
    mates with every Gridfinity plate and bin out there.

  Parts
    baseplate   168.0 ×  168.0 ×   4.7 mm     21.1 cm³

  Warnings
    ! Standard Gridfinity: 42 mm pitch, 7 mm height units — mates with every baseplate and bin out there.
    ! The baseplate prints flat, sockets up, no supports; the socket openings go through — screw it down through the corners or double-tape it.

