GRIDFINITY — print notes
====================================================

  Baseplate  2 × 2 sockets, 84 × 84 mm

  PRINTING
    Flat as exported, no supports — every chamfer is 45°.
    2 perimeters, 15% infill. Any material; PLA is fine indoors.

  THE STANDARD
    42 mm pitch, 7 mm height units, the 0.8/1.8/2.15 foot profile —
    mates with every Gridfinity plate and bin out there.

  Parts
    baseplate    84.0 ×   84.0 ×   4.7 mm      5.2 cm³

  Warnings
    ! Standard Gridfinity: 42 mm pitch, 7 mm height units — mates with every baseplate and bin out there.
    ! The baseplate prints flat, sockets up, no supports; the socket openings go through — screw it down through the corners or double-tape it.

