FRENCH CLEAT — print notes
====================================================

  Holder     cup · hangs on a 30 × 12 cleat rail

  PRINTING
    FACE DOWN as exported, wedge up — no supports. Load
    wedges it into the wall; lift to remove.
    3 walls, 20% infill, PETG for garage duty.

  Parts
    cup        70.0 ×   60.0 ×  65.0 mm   #c98a3d

  Notes
    ! Hangs on any 45° french cleat rail (30 × 12 profile — print the rail style if you don't have one). Load presses it INTO the wall; lift to remove.
    ! Prints FACE DOWN, no supports — the cleat wedge only ever shrinks going up.
    ! PETG for garage duty; PLA is fine indoors. 3 walls, 20% infill for brackets.

