FRENCH CLEAT — print notes
====================================================

  Rail       200 mm · 30 × 12 profile · 45° bevel

  PRINTING
    On its back AS EXPORTED. Screw through the countersunk
    holes into STUDS — the rail carries everything.
    3 walls, 20% infill, PETG for garage duty.

  Parts
    rail      200.0 ×   30.0 ×  12.0 mm   #c98a3d

  Notes
    ! Screw the rail to STUDS (or proper anchors) with ⌀4.5 countersunk screws — the rail carries everything.
    ! Print more segments and keep the bevels aligned; the 45° face is the whole system.
    ! PETG for garage duty; PLA is fine indoors. 3 walls, 20% infill for brackets.

