TCG DECK BOX — print notes
====================================================

  Deck       60 cards · standard sleeves
  Inner      68.0 × 40.7 × 93.5 mm
  Lid        cap

  PRINTING
    Both parts AS EXPORTED (box standing, lid/cap opening up)
    — no supports. 3 walls, ~10% infill. PETG shrugs off
    backpacks; PLA is fine on a shelf.

  Parts
    box          78.9 ×   51.6 ×  98.1 mm   #7a4fd4
    cap          78.9 ×   51.6 ×  17.4 mm   #2b2f38

  Notes
    ! Sized for 60 cards at 0.62 mm each (standard sleeves) plus 3.5 mm of finger room — a full deck slides out, not falls out.
    ! Both parts print standing, no supports. 3 walls, 10% infill — the box is all perimeter anyway.
    ! The cap clicks over two side ridges. Too tight? Scale the cap 100.5% in the slicer; too loose, 99.5%.

